Revolutionary Laser System Composed of Massive Arrays of Thousands of Fiber Lasers
Fiber drawing tower in ORC
By replacing the single monolithic rod amplifier that typically equips lasers with a network of fiber amplifiers and telecommunication components, scientists aim to harness the efficiency, controllability, and high average power capability of fiber lasers to produce high energy, high repetition rate pulse sources.
An international team of physicists has proposed a revolutionary laser system, inspired by the telecommunications technology, to produce the next generation of particle accelerators, such as the Large Hadron Collider (LHC).
The International Coherent Amplification Network (ICAN) sets out a new laser system composed of massive arrays of thousands of fiber lasers, for both fundamental research at laboratories such as CERN and more applied tasks such as proton therapy and nuclear transmutation.
The results of this study are published today in Nature Photonics.
Lasers can provide, in a very short time measured in femtoseconds, bursts of energy of great power counted in petawatts or a thousand times the power of all the power plants in the world.
Compact accelerators are also of great societal importance for applied tasks in medicine, such as a unique way to democratize proton therapy for cancer treatment, or the environment where it offers the prospect to reduce the lifetime of dangerous nuclear waste by, in some cases, from 100 thousand years to tens of years or even less.
However, there are two major hurdles that prevent the high-intensity laser from becoming a viable and widely used technology in the future. First, a high-intensity laser often only operates at a rate of one laser pulse per second, when for practical applications it would need to operate tens of thousands of times per second. The second is ultra-intense lasers are notorious for being very inefficient, producing output powers that are a fraction of a percent of the input power. As practical applications would require output powers in the range of tens of kilowatts to megawatts, it is economically not feasible to produce this power with such a poor efficiency.
To bridge this technology divide, the ICAN consortium, an EU-funded project initiated and coordinated by the École polytechnique and composed of the University of Southampton’s Optoelectronics Research Center, Jena and CERN, as well as 12 other prestigious laboratories around the world, aims to harness the efficiency, controllability, and high average power capability of fiber lasers to produce high energy, high repetition rate pulse sources.
The aim is to replace the conventional single monolithic rod amplifier that typically equips lasers with a network of fiber amplifiers and telecommunication components.
Gérard Mourou of École polytechnique who leads the consortium says: “One important application demonstrated today has been the possibility to accelerate particles to high energy over very short distances measured in centimeters rather than kilometers as it is the case today with conventional technology. This feature is of paramount importance when we know that today high energy physics is limited by the prohibitive size of accelerators, of the size of tens of kilometers, and cost billions of euros. Reducing the size and cost by a large amount is of critical importance for the future of high energy physics.”
Dr Bill Brocklesby from the ORC adds: “A typical CAN laser for high-energy physics may use thousands of fibers, each carrying a small amount of laser energy. It offers the advantage of relying on well tested telecommunication elements, such as fiber lasers and other components. The fiber laser offers an excellent efficiency due to laser diode pumping. It also provides a much larger surface cooling area and therefore makes possible high repetition rate operation.
“The most stringent difficulty is to phase the lasers within a fraction of a wavelength. This difficulty seemed insurmountable but a major roadblock has in fact been solved: preliminary proof of concept suggests that thousands of fibers can be controlled to provide a laser output powerful enough to accelerate electrons to energies of several GeV at 10 kHz repetition rate – an improvement of at least ten thousand times over today’s state of the art lasers.”
Such a combined fiber-laser system should provide the necessary power and efficiency that could make economical the production of a large flux of relativistic protons over millimeter lengths as opposed to a few hundred meters.
One important societal application of such a source is to transmute the waste products of nuclear reactors, which at present have half-lives of hundreds of thousands of years, into materials with much shorter lives, on the scale of tens of years, thus transforming dramatically the problem of nuclear waste management. CAN technology could also find important applications in areas of medicine, such as proton therapy, where reliability and robustness of fiber technology could be decisive features.
Publication: Gerard Mourou, et al., “The future is fiber accelerators,” Nature Photonics 7, 258–261, (2013); doi:10.1038/nphoton.2013.75
Image: University of Southampton
- “Mediocre to Awful” State Science Standards Could Jeopardize U.S. Competitiveness
- Laboratory Safety Concerns: Researchers Aren’t As Safe As They Feel
- Quantum Teleportation Between Canary Islands Breaks Chinese Record
- Graphene’s Behavior Can Be Strongly Affected by an Underlying Material
- New Technique Predicts How Hydrogels Transform
- Visualizing the Behavior of Biological Nanostructures in Both Space and Time
- Black Hole Mergers: Cooking With Gas and a 112,000 MPH Kick
- Hubble Image of the Week – Cosmic Fireflies
- Researchers Date the Origins of Photosynthesis to 1.25 Billion Years Ago
- Planets Around a Black Hole? Calculations Show Possibility of Bizarre Worlds of Astonishing Scale
- Scientists Develop a New Way of Measuring Distances to Galaxies
- New Discovery Challenges Dark Matter, Stellar Acceleration Models
- First Direct Evidence of the Formation Process of Brown Dwarfs
- NASA Views One of the Most Rapidly Changing Glaciers in the World